| Description | Product Description: The advanced performance series of USP VI Cyanoacrylates are
a family of products that have been designed and manufactured to meet the demands of today’s product assembly requirements while at the same time passing the USP VI test. These single component, room temperature and rapid curing adhesives have been tested and meet the requirements of the USP VI classification. They are used in medical and applications where the USP VI classification is a requirement.
|
Colorless transparent liquid with a useful temperature range of -65ºF to +200ºF. Full cure 24 hours. Tensile Shear strength 2700-4300 psi.
|
Our Medical Grade cyanoacrylates come in a wide variety of viscosities to meet your cure speed and gap fill requirements. As a rule of thumb, high viscosity (thick) glues cure slower than lower viscosities, but they have a higher gap fill rate.
|
MG5 cps viscosity (very water like) with gap fill .002. Typical fixture time < 15 seconds.
|
MG30- 30 cps viscosity with gap fill .003. Typical fixture time < 15 seconds.
|
MG100- 100 cps viscosity with gap fill .006. Typical fixture time <15 seconds.
|
MG500- 500 cps viscosity with gap fill .007. Typical fixture time < 15 seconds.
|
MG1000- 1000 cps viscosity with gap fill .008. Typical fixture time < 15 seconds.
|
MG1500- 1500 cps viscosity with gap fill .008. Typical fixture time < 15 seconds.
|
MG2400- 2400 cps viscosity with gap fill .008. Typical fixture time < 15 seconds.
|
MG3200- 3200 cps viscosity with gap fill .008. Typical fixture time < 15 seconds.
|
MG4000- 4000 cps viscosity with gap fill .008. Typical fixture time < 15 seconds.| |
| Features | |
| Applications | |
| Applicable Standards | |
| Other | |
| Stock Color | clear |
| Stock Size | 2cc pipette , 28g (1oz) bottles, 56g (2 oz.) bottles, 454g (1 pound) bottles
Special Packaging available upon request. We can also color pigment our Medical Grade superglues. |
|
TDS |
|
|
MSDS |
|
|
Cross Reference
|
CACross.pdf
|
